Designed for warm water diving with aluminum 80s, the Nomad LT is our lightest and most streamlined sidemount rig in the Nomad line. The Nomad LTs exceptional design creates the first sidemount rig of its kind that is simple to set up and configure with an all-in-one webbing harness and wing combination. Pivot points at the chest provide comfort for women and large-chested divers and stainless steel slides at the waist provide a customizable fit. See our Nomad LT Fitting Videofor tips.
Unique to the Nomad LT is the tight wing profile that provides instant trim with an ingenius 3-inch (7.6cm) expansion panel located at the base of the wing. NOMAD Features VideoThis puts air where it is needed for optimal trim and efficiency. A low profile buttplate is located just at the base of the wing for divers with steel 85s, providing easy access to bottles. SuperFabric® brand technology on the outer wing provides optimum resistance to punctures and abrasions, while remaining very flexible. Weight only 5.4lb (2.5kg) the nomad LT is a favourite for travel to warm water destinations. It is extremely streamlined, the nomad LT has 22lbs of lift to carry twin ally 80's cyclinders with a wetsuit or steels when wearing a dry suit.
TEC System On the Dive Rite Nomad LT Sidemount TEC system, pull dumps are located on the bottom with the inflator on the inside right and the OPV loacated on the left side.
Open Water System On the Dive Rite Nomad LT Sidemount OPEN WATER, pull dumps are loacated on the inside right of the wing and the inflator hose is located behind the shoulder for easier dumping in vertical positions. On both, TEC and OPEN Water Models these can be reversed by the divers, if desired. Integrated daisy chain technology gives divers the option for nomad loop bungees or a stanard bungee according to the diver preference. Two seperate bungee, rather than one contineuous beungee provide greater control in the case of a failure.